Outback-power-systems VFX Series Programming Manual Manual do Utilizador descarregar pdf (Página 48)

ADV/FX/STACK-----------P02

Stack 3ph Master

phase

DOWN INC DEC PORT

ADV/FX/STACK-----------P02

stack 1-2ph Master

phase

DOWN INC DEC PORT

ADV/FX/STACK------------P03

stack 3ph Slave

phase

DOWN INC DEC PORT

ADV/FX/STACK-----------P03

stack 1-2ph Master

phase

DOWN INC DEC PORT

ADV/FX/STACK----------P03

stack 3ph Slave

phase

DOWN INC DEC PORT

PRESS FIVE TIMES

Auxiliary (AUX) Functions

The AUX output provides a 12VDC, 0.7ADC max output at the AUX terminals to control either DC or AC

external loads. Typical loads include signaling a generator system to start, sending a fault alarm signal,

or running a small fan to cool the FX.

Press .

NOTE: Pressing and holding the  rst two soft keys

at the same time will always bring up the Main

Menu screen.

Push any soft key on the ADV/SETTINGS/

WARNING screen and go to the ADV/PASSWORD

screen.

MAIN--------------------------

12:12:16A

SUM STATUS SETUP ADV

ADV/SETTINGS/WARNING

changes made could adversely a ect

system performance

ADV

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 58 59

Sem comentários

Outback-power-systems VFX Series Programming Manual Manual do Utilizador Página 48